The Steel Building Guys
When Quality & Price Matters
5547 Carriage Lane
Santa Rosa, Ca 95403
(707) 321-8510
(707) 523-0923 fax
Gable Symmetrical Buildings
Product Description
Gable Symmetrical: A ridged (double slope) building in which the ridge is in the center of the building.
Gable: The triangular portion of the end wall from the level of the eave to the ridge of the roof.
Gauge: N/A
Finish: Red Oxide Primer
Usage: Low Rise Construction
Limitations
- Support Widths from 10' to 600' or More
- Support Height from 10' to 100'
- Support Clear Spans up to 250' or More
- Support Roof Slopes of 1/2 : 12 up to 12 : 12
| Features | Benefits |
|---|---|
| Designers have the capability of arranging sidewall columns that are straight or columns with the more economical tapered section. | Flexible design providing for maximum utilization of interior space. |
| Our plant fabricates all main framing in accordance with the company's strict AISC quality certification guidelines. | The benefit of the quality fabrication practice of Empire is the reduction in building assembly labor, and subsequently lower erection cost. |
| Interior support columns available as either pipe sections or H sections. | Wider buildings are feasible more economically. |
| Empire Steel frames come with welded sub assemblies. Roof purlin support plates and wall girt support plates are factory welded to the main frames. | Saves erection time and increases the overall stiffness of the building. |
| Purlins are supported laterally by the welded plates. | Reduces the amount of purlin roll experienced under heavy loading. |
| Empire Steel furnishes all structural bolts with a corrosion protective plating. | Improves the appearance of the building and helps to speed up erection process, and no more rusted bolts to contend with. |
| Frames are prefabricated as much as possible. | Eliminates costly field work needed to "customize" the frames for specific building configurations. |
| End wall frames can be simple post and beam type construction, or can be built with a full interior type rigid frame to accommodate future expansion. | End walls are furnished in a variety of configurations, again with the flexibility to meet any need. |
Lean-To Buildings
Product Description
Lean-To Buildings: Ideally suited to give you that extra space you need alongside your building. The Lean-To ties in at the eave of your building or below the eave and can provide a variety of uses...from just a covered area to a completely enclosed addition to your building.
Frame Type:
{Image Goes Here}
Gauge: N/A
Finish: Red Oxide Primer
Usage: Low rise Construction
Limitations: A structure having only one slope and depending upon another structure for partial support. A Lean-To can be located at eave or below eave of the supporting structure.
Single Slope Buildings
Product Description
Single Slope Buildings: A sloping roof in one plane. The slope is from one wall to the opposite wall.
Usage: Low rise Construction
Lean-To Buildings
Single Slope Buildings